| |
 |
|
Graveyard Motorsports Rear Racing Axle - 95-99 Eclipse Talon - Non LSD
|
|
Graveyard Motorsports Racing Valves - 4G63
|
|
Our Price: $350.00
|
|
|
Our Price: $179.99
Sale Price: $129.99
You Save $50.00!
|
|
|
|
|
|
This is our Graveyard Motorsports Rear Racing Axle for the 95-99 AWD Eclipse and Talon with Non LSD Rear Differentials. These have a different spline on the axle, and is different that the LSD Version. You will be required to re use your Diff Side Cup, and Mating Part inside. Very Easy to do, if you have any questions feel free to call. THIS WILL DELETE YOUR ABS, Sorry.
|
This is a Set of New Graveyard Motorsports Racing Valves for the 4G63 engines. These are made from high quality steel, and have our custom angle valve grind for optimum performance! These are a great replacement set if you end up breaking valves, and do not want to jump to Stainless or Titanium Valves, due to the high price. This is a great valve for the guys who run there 4G63 hard, in the stock to 400+ HP range. If you bend you old ones, these are the higher performance ones that you want to install as replacements!
|
|
|
|
Frankenstein Cylinder Head - (Stage 1)
|
|
Piston Rod Combo - OEM Evo 9 Pistons / 7 Bolt Rod
|
Our Price: $649.99
Sale Price: $550.00
You Save $99.99!
|
|
|
Our Price: $549.99
Sale Price: $499.99
You Save $50.00!
|
|
|
|
|
|
Here it is, the New Frankenstein Cylinder Head! This head is completely rebuilt, to give you the best performing head for the dollar. This head is aimed at the masses of Stock to 500 HP, and a 8000 RPM Readline! Our Custom Angle Valve Grind is made to deliver maximum flow to our matching port work. Along with New Valve Guides, and Supertech Stage 1 Springs! You can install any camshaft up to a 272 and runs safely with the Frankenstein Cylinder Head, and feel safe that you will not float when hitting the High RPMs. Lastly, Turnaround time is around a week!
|
This is a Set of New Evo 9 OEM Pistons, with Graveyard Motorsport Rings hung on completely reconditioned and ARP'ed 7 Bolt DSM Rods. These are hung correctly for the DSM Blocks, where the 1mm offset of the Evo 9 pistons is aligned to help the rod angle. These are made to fit in the 92-99 4G63 blocks, NOT the Evo 8 and 9 blocks. This is a very good and simple setup if you are wanting high 8.8 to 1 compression, forged aluminum piston, on the lighter 7 bolt rods. This setup should be good up to 400 crank HP. The rods will not have nearly the stress as a usual 2G Piston, since the writs pin 1mm offset.
|
|
|
|
Gates Racing Timing Belt - 4G63
|
|
Frankenstein 274 Degree Racing Camshafts - 4G63
|
Our Price: $134.99
Sale Price: $128.00
You Save $6.99!
|
|
|
|
Our Price: $289.99
|
|
|
|
|
|
This is the Gates Racing Timing Belt for the 4G63 engines. These are Kevlar reinforced for high strength.
|
This is a Set of DSM "Frankenstein" 274 Degree Racing Camshafts from Graveyard Motorsports! This is the FIRST 274 Camshaft on the market, and is based off of the HKS and Kelford 272 and 280 degree cam! We have many customers that are torn between the 272 for drive ability, and the 280 for high performance, and this bridges that gap! The best regrind cam for your dollar, 274 ONLY From Graveyard Motorsports! Specify 90-96 or 97-99 Cam Style for Intake Cam.
|
|
|
Company Update: We just went Direct with Manley Performance Products!! Feel free to contact us for AMAZING Specials on Full Manley builds, and Cylinder Head builds!! We will HOOK YOU UP!! Also, We are now DIRECT with ENGINE PRO! They offer High Quality OE Replacement Parts, along with Performance Parts that do not break the budget. Engine Pro makes Performance Valves, Springs, Bearings, Piston Rings, and Gaskets!
|
|
|
Hot Items!! |
|
|
|
Graveyard Motorsports Rear Racing Axle - 2G AWD - LSD
|
|
Our Price: $280.00
|
|
|
|
Here is our Graveyard Motorsports Rear Racing Axles for the 2G AWD's. These axles are built with hardened 4340 steel, that is 8% larger diameter than the OEM. These will support in the 800 HP range, and are designed for years of regular daily driving use. This listing is for 1 axle, and comes as a half-shaft, with out the diff side cup. These do require swapping that cup over to the axle, just like OEM Axles. ( These are a great replacement for a seized axle in the hub, and you can just swap 1!) Will delete your ABS. IN STOCK!!
|
|
|
|
 |
This Month @ DSM Graveyard!!
This is what we have been developing here at DSM Graveyard, to better serve the DSM Community.
NEW MACHINIST!
Welcome Dennis to the DSM Graveyard Team!
COP PLATES IN STOCK
2G NON LSD AXLES IN STOCK!
NEW EGR BLOCKOFFS
NEW J PIPE FLANGES
NEW BOV FLANGES!
|
