|
|
|
|
|
|
New OEM Evo 8 and 9 Connecting Rod - 22mm Wrist Pin 7 Bolt
|
Our Price: $129.99
Sale Price: $99.99
You Save $30.00
|
|
|
This is a New OEM Evo Connecting Rod for the Evo 8 and 9's. These have a 22mm wrist pin hole, and fit on any 7 bolt crankshaft. They will only hold the 22mm writs pins pistons, like the 1G 7 bolt, all 2G, and all Evo 8 and 9. We thought that these would be way stronger than the early 7 bolt rods, but they are almost the identical.
|
|
|
|
|
|
|
|
|
|
|
|
|
Frankenstein Connecting Rod Set - 6 Bolt - 90-92
|
Our Price: $229.99
Sale Price: $165.00
You Save $64.99
|
|
|
This is a Set of Newly Machined Frankenstein Connecting Rods. This conversion will allow you to run 22mm wrist pins on your 6 bolt rods ( 2G and Evo 8/9 Pistons). These rods have been inspected for cracks, bead blasted, bored, milled, reconditioned, APR'ed, and finally balanced as a matched set (To .1 Gram!). They have a lot of work done to them, and are ready to install. Core charge required if you have not replacement rods.
|
|
|
|
|
|
|
|
|
|
|
|
|
Frankenstein Connecting Rods - 7 Bolt - 92- Evo 9
|
Our Price: $239.99
Sale Price: $189.99
You Save $50.00
|
|
|
This is our 7 Bolt Frankenstein Connecting Rod. These where 6 bolt rods that have been completely converted for 7 bolt engines!! We start with used 6 bolt rods, and they go through inspection for cracks, bead blasting, bored, Blanchard grinding, ARP's, reconditioning, and finally balanced to a matched set. These are ready to install, and can hold upwards of 500HP. Core Required if you do not have core 6 bolt rods.
|
|
|
|
|
|
|
|
|
|
|
|
|
Manley H Beam Racing Connecting Rod Set
|
List Price: $375.00
Our Price: $329.99
Sale Price: $300.00
You Save $75.00
|
|
|
This is a set of Manley H Beam Connecting Rods. These are very high quality and very strong forged 4340 steel rods, with a full floating and bushed wrist pin journal. Manleys also come equipped with ARP 2000 Cap bolts, and are weight matched to within plus or minus 1.5 grams.
|
|
|
|
|
|
|
|
|
|
|
|
|
New Eagle H Beam Connecting Rods
|
List Price: $399.42
Our Price: $329.99
Sale Price: $315.00
You Save $84.42
|
|
|
These are a Set of New Eagle H-Beam Connecting Rods for the 4G63 engines. These are the stock length, for a Non Stroker Engine. These have 21 mm Full Floating Wrist Pin Holes (6 Bolt) and 22mm for 7 Bolt, and come with New High Tensile Rod Bolts. These Rods are recommended on the 450HP and Up engines, and we can install them in our custom engine builds! Specify 6 or 7 bolt.
|
|
|
|
|
|
|
|
|
|
|
|
|
New Scat Racing Connecting Rods - H Beam
|
List Price: $350.00
Our Price: $335.51
Sale Price: $325.00
You Save $25.00
|
|
|
This is a Set of New Scat Racing Connecting Rods, for the 4G63. These are very high quality rods, that can hold upwards of 600 HP. These are Full Floating bushed, and come with New ARP High Strength Fasteners. We Stock these Rods, and they are our Rod of Choice, on the Stage 2 Jonny Walker Shortblock we build here at the shop! Specify 6 or 7 bolt. Also, 7 bolt fits Evo.
|
|
|
|
|
|
|
|
|
|
|
|
|
Manley I Beam "Turbo Tuff" Racing Connecting Rod Set
|
List Price: $782.00
Our Price: $699.99
Sale Price: $689.99
You Save $92.01
|
|
|
This is a set of Manley Turbo Tuff I Beam Racing Connecting Rods. These are forged from 4340 aircraft quality vacuum degassed material, that has been shot peened and 100% magnufluxed. Manley I Beams come with ARP 2000 Cap Bolts. These are a steel rod for high horsepower daily driving and racing engines. These rods are what you want when H beam rods might not cut it, and you want a rod that can handle in the 600-1100 HP range.
|
|
|
|
|
|
|
|
|
|
|
|
|
New Magnus Aluminum Race Rod
|
|
Our Price: $769.00
|
|
|
This is a Set of Magnus Motorsports Billet Aluminum Race Rods, that are capable of holding 1400HP+!! This is the Strongest and Lightest Rod Set on the market, for your full race DSM. These rods are what they use on the fastest 4 banger in the world. Up side, they are the strongest, but the down side is that they are aluminum, and will stretch over time and heavy (1000+ HP) use. Don't get these for a Daily Driver, but a full race motor you will re torque and measure every season.
|
|
|
|
|
|
|
|
|
|
|
|
|
New Magnus I Beam Connecting Rod
|
|
Our Price: $829.00
|
|
|
This is a Set of Magnus I Beam Connecting Rods for the 4G63 engines. These are some Great Rods, that can hold any power you can throw at them. The I Beam is the Magnus rod you can possibly use for a Daily Driver ( if you also want to hold 1000+ HP). If you have a Ultimate Street Car, this is your rod. The Magnus Aluminum Rods are for Race only, and can stretch over time (around 1 season) and should be checked. If you are planning on a Street/Strip, and have more more power than than H Beam can hold, this is what we recommend.
|
|
|
|
|
|
|
|
|
|
|
|
|
Manley Pro 300 M Alloy Racing Connecting Rod Set
|
|
Our Price: $1,050.00
|
|
|
This is a set of 1300Plus HP Manley Pro 300 M Alloy racing rods. These are forged from 300 M Aircraft Quality Materials, that are machined to produce the lightest and strongest rods on the market. The Pro 300 M's are shot peened and 100% Magnufluxed, so you know your rods are ready for the stress of high rpm, and high power loads. These come with 3/8 ARP 2000 Cap Bolts. Horsepower range is 1300 PLUS! Only available in 7 Bolt applications.
|
|
|
|
|
|
|
