DSM Graveyard - Your #1 Source for DSM Parts!

You are here: Home > Perfomance Parts > Engine > Custom Built Engines > Short Block Assembly

Sort By:

Page of 1

Custom Built Frankenstein Short Block - 6 Bolt (Stage 1)

Our Price: $1,799.99
Sale Price: $1,499.99
You Save $300.00

This is DSM Graveyards Custom Build 6 Bolt Frankenstein Short Block!! Capable of holding 450 HP! This build is the best of all components from Mitsubishi: starting with the best platform, the 6 Bolt Turbo Block, with the best internals, the 6 Bolt Big Rods, and 2G 8.5 to 1 Pistons. This is a cost effective short block, that can hold the power most DSM'ers will throw at it. We do specialize in this Frankenstein swap, and do custom machine work. If you want to start with a strong, yet inexpensive short block, this is definitely it! Also, it includes a 3 Month Warranty!!

Custom Built Frankenstein Short Block - 7 Bolt (Stage 1) V2

Our Price: $1,699.99
Sale Price: $1,499.99
You Save $200.00

This is our Custom Built Frankenstein Short Block for the 7 Bolt 4G63's. This one is our Newest version, that is by far the best VALUE. This includes Evo 9 Pistons, on Reconditioned SHOT PEENED 7 Bolt Rods, Reconditioned Crankshaft, and fully assembled. These lover ends hold well over 425 HP due to the Better Wrist Pin Geometry of the Evo 9 Piston ( Explained Below). Best bang for your buck Stage 1 7 bolt short block!!

Custom Built Frankenstein Short Block - 7 Bolt (Stage 1)

Our Price: $1,999.99
Sale Price: $1,599.99
You Save $400.00

This is our Custom Built Frankenstein Short Block Assembly for the 93-99 with the 7 Bolt Cranks. What we do in this rebuild makes the engine capable of holding well over 450HP!! The 7 Bolt Frankenstein Build has a Remanufactured Crankshaft, our Frankenstein Machined 6 Bolt Rods, and New 2g (8.5 to 1) Pistons and Rings. The Blocks are completely machined for the build ( Decked, Bored, Honed, and Hot Tanked) along with New OEM Freeze Plugs. This is awesome motor for you guys not wanting to do a OEM Replacement or have the hassle of a 6 Bolt Swap. Core Charge of $500 applies. We can pre-build your engine, and send it when you are ready, then send your core back, and we will refund your $500 Core Charge, its that easy!

"Jonny Walker" Race Shortblock - (Stage 2)

List Price: $2,500.00
Our Price: $2,299.99
Sale Price: $1,999.99
You Save $500.01

This is our New "Jonny Walker" Short Block. This engine is for the 450-650 HP Rating, for the guys who want Forged Pistons and Rods. We use Remanufactured Crankshafts, that have been Polished and Inspected, or you can choose your upgrade!. Choose from the parts we carry, and build YOUR race motor! This is a great build for someone wanting a bit more than Frankenstein, but not wanting to go with the expensive forged crankshaft (Stage 3). Believe it or not, this does have a 3 month warranty! Also, the price is the same for 6 and 7 bolt engines!

4G63-R Short Block - Only at Graveyard Motorsports

Our Price: $2,000.00

This is our FULL DRAG RACE Short Block that we make here at DSM Graveyard. We have taken all of our experience with High Horsepower Drag Racing, and put it into this short block. These Short Blocks are designed with different clearances, different specs, and are made to be taken apart easily and effectively for racing every weekend. We will make these short blocks to your application, and for the amount of heat and stress you are going to put into them. These are special order engines, and we do recommending buying at least 2 if you are serious about full time racing.

Stage 2.3 Jonny Walker Custom Built Short Block

Our Price: $2,199.99

This is our New "Jonny Walker" 2.3 Short Block. This engine is build for the 450-550 HP Guys, for the guys who want Forged Pistons and Rods. We use Remanufactured 2.3 Stroker Crankshafts, that have been Polished and Inspected, or you can choose your upgrade!. Choose from the Cranks we carry, and build YOUR race motor! This is a great build for someone wanting a bit more than a Frankenstein, but not wanting to go with the expensive forged crankshaft or our (Stage 3). Believe it or not, this does have a 3 month warranty! Also, the price is the same for 6 and 7 bolt engines!

"Jonny Walker" Race Shortblock (Stage 3)

List Price: $3,200.00
Our Price: $2,999.99
Sale Price: $2,499.99
You Save $700.01

This is our "Jonny Walker" Race Short Block, Stage 3. This is our highest HP Rating we offer, and comes as a fully forged rotating assembly. This gives you the choice of piston, rod, and crankshaft, from many different manufactures. This comes Standard with an Eagle Forged 4340 Steel Crankshaft, Mahley Pistons and Rings, and Scat Racing Full Floating Rods. Also comes with ARP Main Bolts Standard (and Aline Honed Block), Torque Plated Block, and your choice of Clevite or ACL Bearings. We will build these in any 4G63 or 4G64 block!

New Magnus Billet Short Block (Stage 4)

List Price: $4,800.00
Our Price: $4,800.00
Sale Price: $4,250.00
You Save $550.00

This is our New Magnus Billet Short Block that we assemble here at DSM Graveyard. This build includes the Magnus Billet Crankshaft, Magnus I Beams, and Magnus Pistons. All Block machining is professionally done, with a torque plate. We will install Magnus Ring, and ACL Race bearings, which are the same used at Magnus. Call us if you are interested, we will happily tailor this build to what you need! These Shortblocks have held Over 1400HP! This is the ULTIMATE DSM Shortblock,