| |
Welcome to DSM Graveyard's Official Website!
Don't see what you need? Ask! We can get it!
Shop Phone # (269) 226-4G63
Your Best Value @ Short Blocks and Cylinder Heads!!
Frankenstein Cylinder Head ~ $499.99!
 |
|
New "Jonny Walker" Race Shortblock (Stage 3)
|
|
Custom Built Frankenstein Short Block - 6 Bolt (Stage 1)
|
List Price: $3,200.00
Our Price: $2,999.99
Sale Price: $2,499.99
You Save $700.01!
|
|
|
Our Price: $1,799.99
Sale Price: $1,499.99
You Save $300.00!
|
|
|
|
|
|
This is our "Jonny Walker" Race Short Block, Stage 3. This is our highest HP Rating we offer, and comes as a fully forged rotating assembly. This gives you the choice of piston, rod, and crankshaft, from many different manufactures. This comes Standard with an Eagle Forged 4340 Steel Crankshaft, Mahley Pistons and Rings, and Scat Racing Full Floating Rods. Also comes with ARP Main Bolts Standard (and Aline Honed Block), Torque Plated Block, and your choice of Clevite or ACL Bearings. We will build these in any 4G63 or 4G64 block!
|
This is DSM Graveyards Custom Build 6 Bolt Frankenstein Short Block!! Capable of holding 450 HP! This build is the best of all components from Mitsubishi: starting with the best platform, the 6 Bolt Turbo Block, with the best internals, the 6 Bolt Big Rods, and 2G 8.5 to 1 Pistons. This is a cost effective short block, that can hold the power most DSM'ers will throw at it. We do specialize in this Frankenstein swap, and do custom machine work. If you want to start with a strong, yet inexpensive short block, this is definitely it! Also, it includes a 3 Month Warranty!!
|
|
|
|
Frankenstein Connecting Rods - Machining 6 Bolt Rods to 7 Bolt Cranks and 2G Pistons - Cores Required
|
|
New Frankenstein Complete Engine - 6 Bolt
|
Our Price: $129.99
Sale Price: $89.99
You Save $40.00!
|
|
|
|
Our Price: $2,999.99
|
|
|
|
|
|
This is the listing for the machining for 6 Bolt Rods, to fit 2G Pistons on a 7 Bolt Crank. These will start by getting measured and checked for cracks, washing them in our parts washer, followed by bead blasting. After that they will be bored to fit the 2G Piston Wrist Pin, and Blanchard Ground to fit the 7 Bolt Crankshaft. Lastly, we Aline Hone the Crankshaft end, install New ARP Rod Bolts, and balance the rod. This is what we do to all of our Frankenstein Engines, to make sure that this rod conversion is done correctly. These will be bored to press pin diameter, not full floating diameter. Uses 7 Bolt Rod and Crank Bearings. Feel free to contact us with any questions, Thanks!! Cores Required (Four 6 Bolt Rods)
|
This is a New 6 Bolt Frankenstein Complete Engine, for your DSM. This is capable of 450 reliable HP!! This Compete Engine starts with a Frankenstein Short Block, with a Rebuilt 1G Head. We use New OEM Head Gasket, Oil Pump, Timing Belt (and components), and Gaskets. This is ready to drop in your car, and is a great price, for what is getting done to the engine. This is a high quality build, using the best of parts for a better than stock, but not nearly the price of full race.
|
|
|
|
Manual Transmission Assembly - 95-99 AWD Turbo
|
|
Frankenstein Cylinder Head - (Stage 1)
|
Our Price: $1,499.99
Sale Price: $1,299.99
You Save $200.00!
|
|
|
Our Price: $649.99
Sale Price: $499.99
You Save $150.00!
|
|
|
|
|
|
This is a Used Manual Transmission Assembly for the 95-99 AWD Turbos. These transmissions shift smoothly and do not grind in any gear, and will make a nice replacement transmission. Not recommended for 350+ HP. These will come with our 30 day warranty against defects, grinding, or worn syncros. Guaranteed to be a good trans when shipped! Please feel free to contact us with any questions, or mileage, Thanks! (One in stock, 132k miles, from a 95)
|
Here it is, the New Frankenstein Cylinder Head! This head is completely rebuilt, to give you the best performing head for the dollar. This head is aimed at the masses of Stock to 500 HP, and a 8000 RPM Readline! Our Custom Angle Valve Grind is made to deliver maximum flow to our matching port work. Along with New Bronze Valve Guides, and Supertech Stage 1 Springs! You can install any camshaft up to a 272 and runs safely with the Frankenstein Cylinder Head, and feel safe that you will not float when hitting the High RPMs. Lastly, Turnaround time is around a week!
|
|
|
We carry the following manufactures!
           
|
|
|
Frankenstein Special! |
|
|
|
Frankenstein Connecting Rod Conversion - 6 Bolt w/ 22mm Wrist Pins
|
Our Price: $80.00
Sale Price: $49.99
You Save $30.01!
|
|
|
|
This is the Rod Exchange for the 6 Bolt Frankenstein Connecting Rods. What this listing is for, is to get your writs pin holes bored to the 22mm size for any 2G, Evo, or Performance Style Piston. These will also be bead blasted, and cleaned. When you get these back, you will need to take them to your machine shop to have the rods reconditioned, pistons put on, and new bolts installed. This is a great way to get your 6 Bolt engine rebuild to hold the extra power, and up your compression! We can send these ASAP if you pay the core charge, or we will send the core charge back when we see your old rods!
|
|
|
|
 |
This Week @ DSM Graveyard!!
This is what we have been developing here at DSM Graveyard, to better serve the DSM Community.
New 2G Rear Axles!
Graveyard Motorsports!
New Machine Shop!
|
